JOSKIN MODULO 2 14000MEB

JOSKIN

MODULO 2 14000MEB

Nuovi

T42926/140

Operabile

MODULO2 14000MEB slurry tanker with sprung drawbar and vacuum pump Call for Price European certification for 18 t maximum permissible axle load (+ 3/4 t at the eyelet) at 40 km/h for double-axle vehicle (cat. R) Bogie leaves: 1,600 mm instead of 1,350 mm (COMPULSORY for wheel Ø from 1,260 to 1,405 mm) - except from 5,000 to 8,400 l: 1,500 mm LED side marker lights ADR 130-10S axles with 406 x 120 mm brakes for double-axle vehicle with free- or self-steering system instead of 100/130-8S 400 x 80 mm Free-steering axle with shock absorber(s) and hydraulic locking system (DA). ATTENTION: the free-steering axle must be locked above 15 km/h. JOSKIN Ø 80 mm 3 t knee-joint eyelet instead of Ø 50 mm bolted flat eye (small plate) 2 rear LED work lights + flashing beacon (with control via in-cab box or ISOBUS button (ISOBUS configuration required)) Hydraulic pump change-over control (DA) ECOPUMP: special large-volume exhaust pipe with oil collector, high air intake and noise level reduction Special Ø 150 mm JOSKIN pressure relief valve (standard with PN 130, PN 155 and PNR 155) Walterscheid wide-angle P.T.O.-shaft (1 side) Ø 6" (150 mm) communicating gauge (transparent Perspex tube) instead of standard sight glass Ø 8" (200 mm) flanged opening instead of standard Ø 6" (150 mm) opening (left or right on the front - to be specified) Ø 6'' (150 mm) suction valve with Perrot rocking jaw Pre-equipment for turbo-filler (on the left in the direction of travel) Pre-equipment for Ø 200 mm not built-in front JUMBO Brakes in proportion to the load on mechanical suspension (air brakes compulsory) Wheels 710/50R26.5 (BKT) FL693M Ridemax 170 D (Ø 1,383 x 727 mm, 8,160 kg per wheel at 40 km/h and 4 bar) instead of 400R22.5 JUROP PN 106 pump (11,000 l/min at atmospheric pressure - 10,000 l/min at 60% vacuum) - 1,000-rpm speed-increasing gearbox - with automatic lubrication instead of MEC 8000 Air brakes with spring cylinders instead of standard parking brake (air brakes compulsory) PENDI-START pre-equipment for MODULO2 - including buttresses, boom support and Ø 8'' stone trap under the tank instead of rear valve and standard scatterer (flow meter incompatible)

Si